Drafter 可帮助您快速生成并精确创建二维工程图，明确传达设计的制造规范。当三维模型发生变更时，所有工程视图将自动更新。借助其完备的尺寸标注、公差设定与注释工具集，能够大幅缩短设计到制造的周期，降低开发成本，加速产品开发流程。
文件大小: 4.7 MB
本软件专为各类管网、管道系统设计人员研发。提供从节点数据录入、参数自动分配到管网图纸生成的全流程支持。设计成果可兼容主流CAD应用二次编辑，或直接通过Drafter进行打印输出。
由于内置污水管网专属元件库与功能模块，本程序特别适用于排水管网设计。其通用性同时满足供水管网、燃气管道、排水系统乃至道路横断面设计需求。
软件智能化生成管网纵断面图。虽专为排水管网纵断面开发，亦能高效应用于其他管网类型。
核心功能:
・自动设定特征参数
・支持DXF矢量格式图纸输出（兼容主流CAD二次开发）
・无需第三方软件即可直接打印纵断面图纸
・预制污水处理设施标准元件库（包含化粪池、检查井、阻尼器等）
・自动生成管网统计报表
・显著提升绘图与图纸修改效率
・高度可配置化 – 提供多维度参数设置
Drafter 使您能够快速生成和详细创建 2D 工程图，并交流设计的既定制造方式。当您的 3D 模型中出现变更时，所有工程图视图都将自动更新。使用 Drafter 全面的尺寸、公差和注解工具集，可以显著缩短从设计到制造的时间，同时降低成本，从而加快产品开发过程。
File size: 4.7 MB
Drafter is intended for designers of all kinds of pipe networks, pipelines, and so on. It offers help from entering the data of nodes, automatically assigning some values, until a pipe network drawing is generated. The drawing can be modified in most CAD applications or printed directly from Drafter.
Due to its many built-in functions and ready-made objects for wastewater treatment plants, the program is particularly well suited for sewage networks. It is equally well used by users to create drawings of: water supply, gas, drainage and even to create road cross-sections.
Drafter automatically creates profiles of pipe networks. It was developed for creating sewage network profiles, however it can be successfully used for other network types.
Drafter
automatically sets the characteristic values,
generates drawings in vector format dxf (can be further processed in most CAD software),
allows direct printing the generated profiles without any additional software,
it has built-in, ready-to-use objects: (e.g.: septic tanks, manholes, dampers, pipes),
generates pipe networks statistics,
greatly speeds up the creation and modification of drawings.
is flexible – has many configuration options.
