InfoDrainage 使设计师、工程师、顾问、开发商、审阅者、审批机构和供排水公司能够设计与验证排水系统。
Autodesk InfoDrainage 2025.x | 1.8 Gb
Autodesk 发布 InfoDrainage 2025 ,这一完整的设计与分析解决方案为设计师、开发商、景观建筑师、工程师、顾问和审批机构提供以下核心功能:快速精准地进行排水系统设计与审计。
增强与 Civil 3D 的集成性
我们很高兴宣布 InfoDrainage 与 Civil 3D 集成性的重大升级,旨在进一步优化排水设计工作流。该新功能可实现水力建模结果从 InfoDrainage 至 Civil 3D 的无缝传输,配合现有集成特性,拓展设计与分析能力,助力制定数据驱动的决策并提供更灵活高效的报告方案。
升级集成功能的核心亮点:
– 最大流量值: 支持在 InfoDrainage 中运行模拟并将最大流量值直接传输至 Civil 3D 的管道属性中,确保所有流体相关数据在 Civil 3D 模型中精准呈现。
– 重现期值: 该集成功能还支持将重现期值传输至 Civil 3D 的管道属性中。这有助于您在 Civil 3D 模型中建立与水力建模结果关联的暴雨频率参数。
– 最大流速值: 现在可将最大流速值从 InfoDrainage 传输至 Civil 3D 扩展数据集。这为排水网络内流速的深度分析提供支持,帮助识别潜在问题区域并优化管网组件/材料以在关键位置实施防护。
通过整合这些新增的水力建模结果,用户可在 Civil 3D 项目中实现更高精度的细节呈现。增强的集成性优化了双向迭代流程,带来更高效的设计优化与项目成果提升。
对于 Civil 3D 用户而言,智能灵动的排水设计流程现已触手可及——这正是 InfoDrainage 核心价值的重要体现。除了效率与互操作性的提升,本版本另一关键特性是灵活报告功能,显著减轻用户的报表负担。
InfoDrainage 灵活报告功能
最新版本为所有用户推出灵活报告功能,支持将全部可用输入参数、输出结果、模拟数据、设计成果、计算值等信息基于连接性整合至同一表格。过去一年中,该功能是用户呼声最高的需求,我们为其正式发布深感振奋。
您可根据需要将管道、检修井、入水口、出水口、可持续排水系统(SuDs)及汇水分区的属性整合至同一表格——真正实现灵活配置。此前,众多用户指出完成排水设计后需耗费30-60分钟甚至更久将结果导出至电子表格——这一问题现已彻底解决,显著提升效率并消除重复性劳动。
模拟报告新增属性/结果
我们很高兴为 InfoDrainage 的管道与检修井模拟结果新增一系列属性。这些升级旨在通过结构化表格为您提供更全面的排水系统性能概览,助力制定科学决策并优化排水设计报告质量。
水力梯度线(HGL)与能量梯度线(EGL)此前仅显示于管道纵断面,现已纳入模拟汇总表格。这一改进使 HGL/EGL 结果触手可及,大幅提升分析与报告效率。
新增裕度属性值(水面高程与地面高差),现纳入模拟汇总表。这为排水系统的安全边界提供关键数据,有助于识别潜在内涝风险区域。
对于管道,我们现提供上下游端点的 HGL/EGL 值(HGLup、EGLup、HGLdown、EGLdown)。该详细报告可精确定位管段沿程水力条件,便于深度分析与问题排查,并因新增属性与 Civil 3D 管道属性匹配而提升迭代效率。
这些升级旨在为您提供更丰富的数据集,实现对排水系统性能的透彻理解。模拟结果摘要新增属性的整合,确保您能随时获取关键信息制定科学决策,最终实现更稳健高效的排水解决方案。
此最新版本彰显了我们持续优化 InfoDrainage 的承诺,通过集成行业尖端功能确保您拥有打造卓越排水系统设计所需的工具。
InfoDrainage 作为自动化雨水设计软件,提供暴雨管理设计的全面评估,并通过”一键式”方法学优化径流削减实践。相比其他设施规划工具与电子表格,InfoDrainage 通过与 CAD 集成大幅缩短设计周期,适配任意工作流程。
IMAGINiT 专家 Randy McCollum 探析 Autodesk Innovyze InfoDrainage 工具集功能
Autodesk 助力人们构想、设计并创建更美好的世界。全球专业人士——从设计师、工程师、建筑师到数字艺术家、学生与爱好者——通过 Autodesk 软件释放创造力并应对重大挑战。
厂商: Autodesk Inc.
产品名称: InfoDrainage
版本: 2025.x
支持架构: x64
InfoDrainage 使设计师、工程师、顾问、开发人员、审阅者、批准机构和供水公司能够设计和核查排水系统。
Autodesk InfoDrainage 2025.x | 1.8 Gb
Autodesk has released InfoDrainage 2025 is a full design and analysis solution that designers, developers, landscape architects, engineers, consultants and approval authorities rely on to: Design and audit drainage systems quickly and confidently.
Enhanced integration with Civil 3D
We’re excited to announce a significant enhancement to the integration between InfoDrainage and Civil 3D, aimed at further streamlining your drainage design workflows. This new feature enables the seamless transfer of hydraulic modeling results from InfoDrainage to Civil 3D, joining existing integration features, extending the capabilities of your design and analysis capabilities, enabling informed design decisions and providing you with more flexible, streamlined reporting.
Key features of the enhanced integration:
– Maximum Flow values: This enables you to run simulations in InfoDrainage and transfer the maximum flow values directly to the corresponding pipe properties in Civil 3D, ensuring that all flow-related data is accurately represented in your Civil 3D models.
– Return Period values: The integration also supports the transfer of Return Period values to the pipe properties within Civil 3D. This helps you establish the storm frequency associated with the hydraulic modelling results in the Civil 3D model.
– Maximum Velocity values: You can now send maximum velocity values from InfoDrainage to the extended dataset within Civil 3D. This helps inform a more detailed analysis of flow velocities within the drainage network, helping you identify potential areas of concern and optimize the network parts/materials to provide protection where needed.
By incorporating these additional hydraulic modeling results, users can achieve a higher level of detail and accuracy in their Civil 3D projects. The enhanced integration facilitates a smoother round-tripping process, allowing for more efficient design iterations and improved project outcomes.
For Civil 3D users, it’s now easier than ever to perform the drainage design process in an agile, responsive, and intelligent manner – part of the larger story of the power InfoDrainage. So, while this integration brings efficiency and interoperability, another key feature this release is flexible reporting, which brings a significant reduction in reporting tedium for users.
Flexible reporting in InfoDrainage
The latest release brings flexible reporting to all InfoDrainage users, enabling you to expose all of the available inputs, outputs, simulation results, design results, calculated values, etc., all in one table based on connectivity. Over the last year, we’ve heard this feature requested from users more than any other feature, so we’re excited to be rolling it out.
You can combine attributes from pipes, manholes, inlets, outlets, Sustainable Drainage Systems (SuDs) and sub-catchments all in one table as you need it – it’s flexible. Many customers previously noted that after they finished the drainage design process in InfoDrainage, it was taking 30 to 60 minutes or more to pull results into a spreadsheet – but that’s no longer the case – improving efficiency and removing tedium from the drainage design process.
New attributes/results in simulation summaries
We are pleased to introduce a set of new attributes in the simulation results for both pipes and manholes within InfoDrainage. These additions are designed to provide you with a more comprehensive overview of your drainage system’s performance in a tabular format, facilitating more informed decision-making and enhanced drainage design reporting.
Hydraulic Grade Line (HGL) and Energy Grade Line (EGL), previously displayed only in the pipe long-section, are now included in the simulation summary table. This enhancement allows for quick and easy access to HGL and EGL results improving the efficiency of your analysis and reporting processes.
The Freeboard attribute, representing the distance between the maximum water level and the ground level, is now reported in the simulation summary. This provides crucial information on the safety margins within your drainage system, helping to identify areas at risk of flooding.
For pipes, we now report HGL and EGL values at both the upstream and downstream ends (HGLup, EGLup, HGLdown, EGLdown). This detailed reporting offers a more granular view of the hydraulic conditions along the pipe length, facilitating better analysis and troubleshooting and more efficient round-tripping with Civil 3D as these new attributes match the Civil 3D pipe properties.
These enhancements are designed to provide you with a richer set of data, enabling a more thorough understanding of your drainage system’s performance. The inclusion of these new attributes in the simulation results summary ensures that you have all the necessary information at your fingertips to make informed design decisions, ultimately leading to more robust and efficient drainage solutions.
This latest release underscores our commitment to continually refining InfoDrainage, integrating best-in-class capabilities to ensure you have the tools you need to produce outstanding drainage system designs.
InfoDrainage is an automated stormwater design software program that provides comprehensive assessment of stormwater designs and is enhanced by “one-click” methodology, optimizing for all Runoff Reduction practices. Unlike many other tools and spreadsheets that assist with facility planning, InfoDrainage is integrated with CAD to shorten the design time, whatever your workflow.
IMAGINiT expert Randy McCollum explores the features available in the Autodesk Innovyze InfoDrainage toolset
Autodesk helps people imagine, design and create a better world. Everyone—from design professionals, engineers and architects to digital artists, students and hobbyists—uses Autodesk software to unlock their creativity and solve important challenges.
Owner: Autodesk Inc.
Product Name: InfoDrainage
Version: 2025.x
Supported Architectures: x64
Languages Supported: english
System Requirements: Windows *
Size: 1.8 Gb